Hours calculator

Type a start and a finish time to see the hours and minutes between them, less any break, in decimal hours for a time sheet, and the pay at an hourly rate.


How it’s worked out

From 08:15 to 16:45 with a 45-minute break is 7 h 45 min, or 7.75 in decimal hours; at 14 an hour that is 108.50.

Hours = finish − start − break
If the finish is earlier than the start, it is the next day: add 24 hours

Examples

Worked out by this calculator:

TimesBreakHoursDecimal
09:00 to 17:3030 min8 h8.00
08:15 to 16:4545 min7 h 45 min7.75
22:00 to 06:00 (next day)–8 h8.00
07:00 to 19:0060 min11 h11.00
12:30 to 13:10–40 min0.67

Minutes as decimal hours

Time sheets and invoices often want hours as a decimal: minutes ÷ 60.

MinutesExactlyTo 2 places
5 minutes0.08330.08
6 minutes0.10.10
10 minutes0.16670.17
12 minutes0.20.20
15 minutes0.250.25
20 minutes0.33330.33
30 minutes0.50.50
40 minutes0.66670.67
45 minutes0.750.75
50 minutes0.83330.83

How to read the result

Common mistakes

How to use it

  1. Type the start and finish times; 12-hour times such as 9:30 pm work too.
  2. Type the break in minutes, or leave it at 0.
  3. Add an hourly rate to see the pay.

Questions

How do I work out the hours between two times?

Take the start from the finish and add 24 hours if the finish is earlier (the next day), then take off any break. The calculator does this and shows hours and minutes and decimal hours.

What is 7 hours 45 minutes in decimal?

7.75 hours: 45 minutes is 45 ÷ 60 = 0.75 of an hour.

Does it work for night shifts?

Yes. A finish earlier than the start is taken as the next day, so 22:00 to 06:00 is 8 hours.

How do I add up a whole week?

Use the time card calculator: a start, finish and break for each day, with the week’s total, overtime and pay.

More calculators

Elsewhere on Yuzool

See all 49 calculators. Everything runs in your browser; nothing you type is sent anywhere.