How it’s worked out
Five days of 09:00 to 17:30 with 30-minute breaks is 40 h. With overtime after 37.5 hours at 1.5 times a rate of 15 an hour: 37 h 30 min regular and 2 h 30 min overtime, 618.75 before tax.
Each day = finish − start − break (the next day if the finish is earlier), rounded if you choose Week = the days added up; overtime = week − hours before overtime Pay = regular hours × rate + overtime hours × rate × overtime multiple
Rounding
Some employers round each day to the nearest few minutes. The calculator rounds each day, halves going up, before adding them:
| Rounded to | 7:53 worked | 8:07 worked | 7:22 worked |
|---|---|---|---|
| 5 minutes | 7:55 | 8:05 | 7:20 |
| 6 minutes | 7:54 | 8:06 | 7:24 |
| 15 minutes | 8:00 | 8:00 | 7:15 |
Rounding rules for pay can be set by law or by your contract: check which applies to you before relying on rounded hours.
How to read the result
- Total hours: the week in hours and minutes, and as decimal hours for a time sheet.
- Regular hours and overtime, when you type the hours before overtime.
- Pay before tax, when you type an hourly rate.
- Each day in a table you can copy or open as a spreadsheet.
Common mistakes
- Writing decimal hours as hours and minutes: 37:30 is 37.50 hours, not 37.30.
- Leaving a break out: unpaid breaks come off each day.
- Counting a day off: leave its times empty and it counts as no hours.
- Overtime by the day: this counts overtime past a weekly total; if yours is daily, add up the days over the limit yourself.
How to use it
- Type each day’s start, finish and break; add or remove days (up to 14, for two weeks).
- Choose rounding if your workplace rounds.
- Type the hours before overtime and your rate for the pay.
Questions
How do I calculate my hours for the week?
Work out each day as finish less start less breaks, then add the days. Type the times here and the calculator adds them up, in hours and minutes and in decimal hours.
How is overtime worked out?
Hours past the weekly figure you type are overtime, paid at the multiple you choose (1.5 times by default). Rules differ by country and contract, so type yours.
How do I convert minutes to decimal hours?
Divide the minutes by 60: 15 minutes is 0.25, 30 minutes is 0.5 and 45 minutes is 0.75 of an hour.
Can I send the week to a spreadsheet?
Yes: open Each day, then Open as a spreadsheet (in Gridwork) or Copy table.
More calculators
Elsewhere on Yuzool
- How to make a timesheet Hours’ guide
- Timesheet template in Gridwork
- Hours a time tracker that sends hours to Invoice
See all 49 calculators. Everything runs in your browser; nothing you type is sent anywhere.